Saturday, January 29, 2011
The aging eyes saga continues
Been working on my shooting using a CZ 452 .22lr trainer with open iron sights, shooting 50 foot NRA targets indoors. With my normal contacts it was pretty rough; contacts with reading glasses not much better; things improved a bit with bifocal contact lenses. Today, I shot with my new eyeglasses, which have progressive lenses.
Here's the target I shot. I'm pretty pleased with the results: I could see the front sight pretty well, and as I worked on a consistent sight picture, the progressive lenses helped me maintain a consistent cheek weld as I worked to put the front sight into sharpest focus (there is a sweet spot where the front sight is clearest). This is a benefit of the progressive lenses that had not occurred to me.
Now the problem will be getting shooting glasses in polycarbonate safety lenses, especially for the carbine--those caps really explode off the nipple of the Maynard. Polycarbonate won't be cheap. But I'm thinking that my musket shooting will improve pretty dramatically by switching over to eyeglasses versus sticking with contact lenses and shooting glasses.
Monday, January 24, 2011
Carbines sent off for work
Friday, January 14, 2011
Miroku 1863 Springfield Type 1 refinish/upgrade



Removed the varnish and re-shaped slightly (could have removed more wood). Tall dove-tail front sight added by Whitacre. Trigger smoothed and lightened by Walt. Glass bedded, and refinished. I'm planning on adding an L shaped peep rear sight for 50 and 100 yards. Weighs in at 9.9 lbs, could probably have shaved another half pound of wood.Dixie Gunworks Japanese Springfield
I sent the crunchy heavy pull lock to Walt, and he returned it operating smoothly, with a light trigger. So far so good. I then sanded the stock to remove the varnish and reduce some of the bulkiness. I found a .578 Hodgdon used mould on the N-SSA bulletin board.
Then I hit the wall. My first attempt at bedding didn't go well. I didn't put enough epoxy, and the two piece stock separated when I removed the barrel. So I sanded down the barrel channel, reinforced the forearm, and started over. To get a full length bed, the miroku required ALOT of Acraglas Gel. Lots of voids to fill. This second attempt was successful but...
The musket now weighs a ton. Balance isn't bad, the overweight barrel is now offset by the epoxy laden breech. I could probably put wheels on it and enter the artillery competition. The musket has stand hunter written all over it. Well, its not that bad, but it is noticeably heavier than the one I built last year, and the one I'm building this year. And its a backup to the backup.
I will post some pics soon. Just need to stain the stock and it should be all set. On another note, I'll be able to do a side by side comparison of a new Whitacre barrel and a newly relined Hoyt barrel this Spring. Neither has seen a round go through it. Both are .576, both are 3 land, I think the Whitacre is 1 in 72 and the Hoyt is 1 in 56.
Wednesday, January 12, 2011
Iowa MONSTER buck....
Saturday, December 18, 2010
New 150th Anniversary Civil War blog
Should be an interesting blog to read. Today's entry for December 18, 1860:
Enjoy.There is little relevant news from the South Carolina Convention today due to a smallpox outbreak that forced the delegates to relocate to Charleston. Before adjuring the meeting early, the delegates elected Mr. Jamison to the position of President and reaffirmed the need to draft a resolution calling for secession. Meanwhile, the South Carolina legislature is contemplating several important bills, including one that would limit the movement of free blacks and another to appropriate money to fortify Charleston and build up an arsenal.
Senator Wade, of Ohio, gave a characteristically heated speech in Congress yesterday upbraiding the stance of the South and sparking familiar debate. Although a few remaining hopeful Congressmen – most of them from the Border States – continue to submit resolutions to the Special Committee, many observers believe that the only way to reach consensus is to leave it to a National Convention.
A myriad of personal tragedies have struck several of the highest officers at the Post Office Department, further exacerbating the problems department leadership will face if Southern states secede.
Troubled by the lackluster financial markets, merchants in Baltimore are imploring Governor Hicks to call a special session of the Maryland Legislature to discuss the crisis.
Thursday, December 16, 2010
Open sights and aging eyes
Which led me to spend the last day or two researching Rx shooting glasses, aperture suction-cup thingies, etc etc. I should have stayed in skirmishing when I was young and able-bodied; now I am decrepit and can't see straight.I suspect my eye issues are partly explain why I shot the carbine (with a peep) better than my two-bander this past season.
I like what Jon said--I wish I could have last season back knowing what I know now. But at least I've got a game plan for my musket for this next season.
Jim
ps. here's a cool link: http://www.starreloaders.com/edhall/nwongmain/eyeguide.html . Check out the links to his other topics.
Tuesday, December 14, 2010
Hoyt barrel reline
Will need to sight it in again when I get some nice weather, have moved on to refinishing my backup musket, and looking out for the fedex truck with a Sharps carbine that I'm getting as a trade. Will be sending it off to Charlie Hahn to get it skirmish ready, now also planning to send my Smith to Hoyt for a reline. Bring on the Spring!
Wednesday, December 8, 2010
Armi Sport 1859 Sharps
Tuesday, December 7, 2010
Monday, December 6, 2010
2010 hunting season
Sunday, December 5, 2010
2011 Skirmish Schedule--New England Region
5/7&8 Hopkinton
5/18-22 Nationals
6/4&5 Glastonbury
6/18&19 Saratoga
7/9&10 Glastonbury
7/23&24 Saratoga
8/13&14 Chaplin, CT
8/27 Hopkinton one day recruitment
9/17&18 Hopkinton
10/5-9 Nationals
10/22&23 Saratoga
Looking forward to it!!
Tuesday, November 23, 2010
2011 Schedule
Jon

